ResinMix 2C Overview
These systems utilise axial piston pumps to meter the materials. These generate high flow and have the ability to have the displacement varied enabling the pumps to be adjusted for optimising flow & ratio.
The pumps are directly coupled to Geared AC motors of 4.4 kW to give a powerful and robust metering system.
The unit is fed from bulk systems or IBC by diaphragm pumps with in line heating available to condition the materials prior to use.
The systems are initially designed for the infusion of large composite structures.
| Metering technology | Direct coupling of inverter controlled, geared AC motors directly coupled to variable displacement axial piston pumps |
| Ratio range | 10:100 through 100:100 to 100:10 |
| Output (depending on Viscosity) | Standard ranges are 20, litres per minute |
| Viscosity range | Up to 2,000 cps (processing viscosity) |
| Maximum operating pressures | 260 bar at pump outlet |
| Mixing options | Disposable static mixers |
| Metering control | By in line gear type flowmeters |
| Control systems | 2KM Microprocessor controller or Siemens s7-300 system. Both with touch screen operator interface |
| Services | 3 phase +N +E 32 Amp Pneumatic 20mm 6 bar for pump supply |
| Options available | Diaphragm pump supply from IBC or 205 litre drums Supply drum low level Intermediate conditioning vessels In line heating In line degassing Large vessels 2500 litre available Impingement mixing for spray application |
| Area of application | Industry | Process |
|---|---|---|
| Composites | Wind Energy | Infusion of blade shells Infusion of moulds |
| Marine | Infusion of large structures | |
| Coating | Marine | Airless spray application of fast reaction materials |
| Typical materials processed: |
|---|
| Epoxy |